a carregar...

IIIUC

Instituto de Investigação Interdisciplinar

Immunology (14)

Title : 3D printing of new biobased unsaturated polyesters by microstereo-thermallithography
Author(s): Goncalves, FAMM; Costa, CSMF; Fabela, IGP; Farinha, D; Faneca, H; Simoes, PN; Serra, AC; Bartolo, PJ; Coelho, JFJ
Source : BIOFABRICATION Document Type : Article Volume : 6 Issue: 3 Pages: - DOI: 10.1088/1758-5082/6/3/035024 Published: 2014 SEP
Times Cited: 4
 
Title : A model for acoustic absorbent materials derived from coconut fiber
Author(s): Ramis, J; del Rey, R; Alba, J; Godinho, L; Carbajo, J
Source : MATERIALES DE CONSTRUCCION Document Type : Article Volume : 64 Issue: 313 Pages: - DOI: 10.3989/mc.2014.00513 Published: 2014
Times Cited: 2
 
Title : A new sheep model with automatized analysis of biomaterial-induced bone tissue regeneration
Author(s): Atayde, LM; Cortez, PP; Pereira, T; Armada-da-Silva, PAS; Afonso, A; Lopes, MA; Santos, JD; Mauricio, AC
Source : JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE Document Type : Article Volume : 25 Issue: 8 Pages: 1885-1901 DOI: 10.1007/s10856-014-5216-2 Published: 2014 AUG
Times Cited: 2
 
Title : A new strategy for the simultaneous identification of constitutive laws parameters of metal sheets using a single test
Author(s): Prates, PA; Oliveira, MC; Fernandes, JV
Source : COMPUTATIONAL MATERIALS SCIENCE Document Type : Article Volume : 85 Issue: Pages: 102-120 DOI: 10.1016/j.commatsci.2013.12.043 Published: 2014 APR 1
Times Cited: 10
 
Title : Adsorption of bovine serum albumin on Zr co-sputtered a-C(:H) films: Implication on wear behaviour
Author(s): Escudeiro, A; Polcar, T; Cavaleiro, A
Source : JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS Document Type : Article Volume : 39 Issue: Pages: 316-327 DOI: 10.1016/j.jmbbm.2014.08.001 Published: 2014 NOV
Times Cited: 3
 
Title : Ag:TiN nanocomposite thin films for bioelectrodes: The effect of annealing treatments on the electrical and mechanical behavior
Author(s): Pedrosa, P; Machado, D; Evaristo, M; Cavaleiro, A; Fonseca, C; Vaz, F
Source : JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A Document Type : Article Volume : 32 Issue: 3 Pages: - DOI: Published: 2014 MAY
Times Cited: 4
 
Title : An almost user-independent evaluation formalism to determine arbitrary residual stress depth distributions with the hole-drilling method
Author(s): Nau, A; Feldmann, G; Nobre, J; Zinn, W; Scholtes, B
Source : INTERNATIONAL CONFERENCE ON RESIDUAL STRESSES 9 (ICRS 9) Document Type : Proceedings Paper Volume : 768-769 Issue: Pages: 120-+ DOI: 10.4028/www.scientific.net/MSF.768-769.120 Published: 2014
Times Cited: 1
 
Title : Assessment of the fatigue life of aluminium spot-welded and weld-bonded joints
Author(s): Pereira, AM; Ferreira, AM; Antunes, FV; Bartolo, PJ
Source : JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY Document Type : Article Volume : 28 Issue: 14-15 Pages: 1432-1450 DOI: 10.1080/01694243.2012.698107 Published: 2014 JUL 18
Times Cited: 3
 
Title : Assessment of the Mechanical Properties of Nanoclays Enhanced Low T-g Epoxy Resins
Author(s): Ferreira, JAM; Reis, PNB; Costa, JDM; Capela, C
Source : FIBERS AND POLYMERS Document Type : Article Volume : 15 Issue: 8 Pages: 1677-1684 DOI: 10.1007/s12221-014-1677-7 Published: 2014 AUG
Times Cited: 2
 
Title : Biocompatibility and hemocompatibility of polyvinyl alcohol hydrogel used for vascular grafting-In vitro and in vivo studies
Author(s): Alexandre, N; Ribeiro, J; Gartner, A; Pereira, T; Amorim, I; Fragoso, J; Lopes, A; Fernandes, J; Costa, E; Santos-Silva, A; Rodrigues, M; Santos, JD; Mauricio, AC; Luis, AL
Source : JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A Document Type : Article Volume : 102 Issue: 12 Pages: 4262-4275 DOI: 10.1002/jbm.a.35098 Published: 2014 DEC
Times Cited: 18
 
Title : Boron nitride nanotube-mediated stimulation modulates F/G-actin ratio and mechanical properties of human dermal fibroblasts
Author(s): Ricotti, L; das Neves, RP; Ciofani, G; Canale, C; Nitti, S; Mattoli, V; Mazzolai, B; Ferreira, L; Menciassi, A
Source : JOURNAL OF NANOPARTICLE RESEARCH Document Type : Article Volume : 16 Issue: 2 Pages: - DOI: 10.1007/s11051-014-2247-z Published: 2014 JAN 18
Times Cited: 0
 
Title : Buckling Analysis of Laminated Composite Plates Submitted to Compression After Impact
Author(s): Amaro, AM; Reis, PNB; de Moura, MFSF; Neto, MA
Source : FIBERS AND POLYMERS Document Type : Article Volume : 15 Issue: 3 Pages: 560-565 DOI: 10.1007/s12221-014-0560-x Published: 2014 MAR
Times Cited: 2
 
Title : Carbon nanotube-based bioceramic grafts for electrotherapy of bone
Author(s): Mata, D; Horovistiz, AL; Branco, I; Ferro, M; Ferreira, NM; Belmonte, M; Lopes, MA; Silva, RF; Oliveira, FJ
Source : MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS Document Type : Article Volume : 34 Issue: Pages: 360-368 DOI: 10.1016/j.msec.2013.09.028 Published: 2014 JAN 1
Times Cited: 5
 
Title : CELLULAR STRATEGIES TO PROMOTE VASCULARISATION IN TISSUE ENGINEERING APPLICATIONS
Author(s): Costa-Almeida, R; Granja, PL; Soares, R; Guerreiro, SG
Source : EUROPEAN CELLS & MATERIALS Document Type : Article Volume : 28 Issue: Pages: 51-67 DOI: Published: 2014 JUL-DEC
Times Cited: 8
 
Title : Combined effect of expansive and shrinkage reducing admixtures to control autogenous shrinkage in self-compacting concrete
Author(s): Oliveira, MJ; Ribeiro, AB; Branco, FG
Source : CONSTRUCTION AND BUILDING MATERIALS Document Type : Article Volume : 52 Issue: Pages: 267-275 DOI: 10.1016/j.conbuildmat.2013.11.033 Published: 2014 FEB 15
Times Cited: 10
 
Title : Combined Surface Micropatterning and Reactive Chemistry Maximizes Tissue Adhesion with Minimal Inflammation
Author(s): Pereira, MJN; Sundback, CA; Lang, N; Cho, WK; Pomerantseva, I; Ouyang, B; Tao, SL; McHugh, K; Mwizerwa, O; Vemula, PK; Mochel, MC; Carter, DJ; Borenstein, JT; Langer, R; Ferreira, LS; Karp, JM; Masiak
Source : ADVANCED HEALTHCARE MATERIALS Document Type : Article Volume : 3 Issue: 4 Pages: 565-571 DOI: 10.1002/adhm.201300264 Published: 2014 APR
Times Cited: 9
 
Title : Control of the properties of porous chitosan-alginate membranes through the addition of different proportions of Pluronic F68
Author(s): Buena, CZ; Dias, AMA; de Sousa, HJC; Braga, MEM; Moraes, AM
Source : MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS Document Type : Article Volume : 44 Issue: Pages: 117-125 DOI: 10.1016/j.msec.2014.08.014 Published: 2014 NOV 1
Times Cited: 8
 
Title : Cracking and failure mode in HSC hollow beams under torsion
Author(s): Lopes, SMR; Bernardo, LFA
Source : CONSTRUCTION AND BUILDING MATERIALS Document Type : Article Volume : 51 Issue: Pages: 163-178 DOI: 10.1016/j.conbuildmat.2013.10.062 Published: 2014 JAN 31
Times Cited: 1
 
Title : Curvature assessment of reinforced concrete beams using photogrammetric techniques
Author(s): Dias-da-Costa, D; Valenca, J; do Carmo, RNF
Source : MATERIALS AND STRUCTURES Document Type : Article Volume : 47 Issue: 10 Pages: 1745-1760 DOI: 10.1617/s11527-013-0148-8 Published: 2014 OCT
Times Cited: 3
 
Title : DLC-W coatings tested in combustion engine - Frictional and wear analysis
Author(s): Mutafov, P; Lanigan, J; Neville, A; Cavaleiro, A; Polcar, T
Source : SURFACE & COATINGS TECHNOLOGY Document Type : Article; Proceedings Paper Volume : 260 Issue: Pages: 284-289 DOI: 10.1016/j.surfcoat.2014.06.072 Published: 2014 DEC 15
Times Cited: 8
 
Title : Effect of corrosive solutions on composites laminates subjected to low velocity impact loading
Author(s): Mortas, N; Er, O; Reis, PNB; Ferreira, JAM
Source : COMPOSITE STRUCTURES Document Type : Article Volume : 108 Issue: Pages: 205-211 DOI: 10.1016/j.compstruct.2013.09.032 Published: 2014 FEB
Times Cited: 6
 
Title : Effect of different commercial oils on mechanical properties of composite materials
Author(s): Amaro, AM; Reis, PNB; Neto, MA; Louro, C
Source : COMPOSITE STRUCTURES Document Type : Article Volume : 118 Issue: Pages: 1-8 DOI: 10.1016/j.compstruct.2014.07.017 Published: 2014 DEC
Times Cited: 1
 
Title : Effect of friction stir welding parameters on morphology and strength of acrylonitrile butadiene styrene plate welds
Author(s): Mendes, N; Loureiro, A; Martins, C; Neto, P; Pires, JN
Source : MATERIALS & DESIGN Document Type : Article Volume : 58 Issue: Pages: 457-464 DOI: 10.1016/j.matdes.2014.02.036 Published: 2014 JUN
Times Cited: 21
 
Title : Effect of peak target power on the properties of Cr thin films sputtered by HiPIMS in deep oscillation magnetron sputtering (DOMS) mode
Author(s): Ferreira, F; Serra, R; Oliveira, JC; Cavaleiro, A
Source : SURFACE & COATINGS TECHNOLOGY Document Type : Article Volume : 258 Issue: Pages: 249-256 DOI: 10.1016/j.surfcoat.2014.09.020 Published: 2014 NOV 15
Times Cited: 10
 
Title : Effect of tool geometry on friction stir processing and fatigue strength of MIG T welds on Al alloys
Author(s): de Jesus, JS; Loureiro, A; Costa, JM; Ferreira, JM
Source : JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Document Type : Article Volume : 214 Issue: 11 Pages: 2450-2460 DOI: 10.1016/j.jmatprotec.2014.05.012 Published: 2014 NOV
Times Cited: 3
 
Title : Effect of Water and Fiber Length on the Mechanical Properties of Polypropylene Matrix Composites
Author(s): Ferreira, N; Capela, C; Ferreira, JM; Costa, JM
Source : FIBERS AND POLYMERS Document Type : Article Volume : 15 Issue: 5 Pages: 1017-1022 DOI: 10.1007/s12221-014-1017-y Published: 2014 MAY
Times Cited: 2
 
Title : Electrical characterization of Ag:TiN thin films produced by glancing angle deposition
Author(s): Pedrosa, P; Lopes, C; Martin, N; Fonseca, C; Vaz, F
Source : MATERIALS LETTERS Document Type : Article Volume : 115 Issue: Pages: 136-139 DOI: 10.1016/j.matlet.2013.10.044 Published: 2014 JAN 15
Times Cited: 17
 
Title : Electron microprobe analysis of cryolite
Author(s): Guimaraes, F; Silva, PB; Ferreira, J; Piedade, AP; Vieira, MTF
Source : EMAS 2013 WORKSHOP: 13TH EUROPEAN WORKSHOP ON MODERN DEVELOPMENTS AND APPLICATIONS IN MICROBEAM ANALYSIS Document Type : Proceedings Paper Volume : 55 Issue: Pages: - DOI: 10.1088/1757-899X/55/1/012006 Published: 2014
Times Cited: 1
 
Title : Electrostatically driven lipid-lysozyme mixed fibers display a multilamellar structure without amyloid features
Author(s): Melo, AM; Loura, LMS; Fernandes, F; Villalain, J; Prieto, M; Coutinho, A
Source : SOFT MATTER Document Type : Article Volume : 10 Issue: 6 Pages: 840-850 DOI: 10.1039/c3sm52586d Published: 2014
Times Cited: 5
 
Title : Evaluation of residual stresses induced by ultra-high-speed drilling in aluminium alloys
Author(s): Nobre, JP; Guimaraes, R; Batista, AC; Marques, MJ; Coelho, L; Nau, A; Scholtes, B
Source : INTERNATIONAL CONFERENCE ON RESIDUAL STRESSES 9 (ICRS 9) Document Type : Proceedings Paper Volume : 768-769 Issue: Pages: 128-+ DOI: 10.4028/www.scientific.net/MSF.768-769.128 Published: 2014
Times Cited: 0
 
Title : Evolution of the surface plasmon resonance of Au:TiO2 nanocomposite thin films with annealing temperature
Author(s): Borges, J; Buljan, M; Sancho-Parramon, J; Bogdanovic-Radovic, I; Siketic, Z; Scherer, T; Kubel, C; Bernstorff, S; Cavaleiro, A; Vaz, F; Rolo, AG
Source : JOURNAL OF NANOPARTICLE RESEARCH Document Type : Article Volume : 16 Issue: 12 Pages: - DOI: 10.1007/s11051-014-2790-7 Published: 2014 DEC 28
Times Cited: 5
 
Title : Experimental analysis of milling operations in Ti-6Al-4V and Co-28Cr-6Mo alloys for medical devices
Author(s): Ferreira, P; Simoes, F; Relvas, C
Source : MATERIAL FORMING ESAFORM 2014 Document Type : Proceedings Paper Volume : 611-612 Issue: Pages: 1282-1293 DOI: 10.4028/www.scientific.net/KEM.611-612.1282 Published: 2014
Times Cited: 0
 
Title : External CFRP tendon members: Secondary reactions and moment redistribution
Author(s): Lou, TJ; Lopes, SMR; Lopes, AV
Source : COMPOSITES PART B-ENGINEERING Document Type : Article Volume : 57 Issue: Pages: 250-261 DOI: 10.1016/j.compositesb.2013.10.010 Published: 2014 FEB
Times Cited: 11
 
Title : Factors affecting moment redistribution at ultimate in continuous beams prestressed with external CFRP tendons
Author(s): Lou, TJ; Lopes, SMR; Lopes, AV
Source : COMPOSITES PART B-ENGINEERING Document Type : Article Volume : 66 Issue: Pages: 136-146 DOI: 10.1016/j.compositesb.2014.05.007 Published: 2014 NOV
Times Cited: 8
 
Title : Fatigue and impact response of gel-coated glass mats/polyester composites
Author(s): Capela, C; Ferreira, JM; Cravo, H; Costa, JM
Source : JOURNAL OF COMPOSITE MATERIALS Document Type : Article Volume : 48 Issue: 9 Pages: 1131-1137 DOI: 10.1177/0021998313482159 Published: 2014 APR
Times Cited: 0
 
Title : Fatigue behaviour of glass fibre reinforced epoxy composites enhanced with nanoparticles
Author(s): Borrego, LP; Costa, JDM; Ferreira, JAM; Silva, H
Source : COMPOSITES PART B-ENGINEERING Document Type : Article Volume : 62 Issue: Pages: 65-72 DOI: 10.1016/j.compositesb.2014.02.016 Published: 2014 JUN
Times Cited: 11
 
Title : Fatigue life improvement of mig welded aluminium T-joints by friction stir processing
Author(s): Costa, JDM; Jesus, JS; Loureiro, A; Ferreira, JAM; Borrego, LP
Source : INTERNATIONAL JOURNAL OF FATIGUE Document Type : Article Volume : 61 Issue: Pages: 244-254 DOI: 10.1016/j.ijfatigue.2013.11.004 Published: 2014 APR
Times Cited: 6
 
Title : Fire Behaviour of Circular Concrete Columns with Restrained Thermal Elongation
Author(s): Rodrigues, JPC; Laim, LM; Korzen, M
Source : JOURNAL OF ADVANCED CONCRETE TECHNOLOGY Document Type : Article Volume : 12 Issue: 9 Pages: 289-298 DOI: 10.3151/jact.12.289 Published: 2014 SEP
Times Cited: 1
 
Title : Flammability limits of biogenic volatile organic compounds emitted by fire-heated vegetation (Rosmarinus officinalis) and their potential link with accelerating forest fires in canyons: A Froude-scaling approach
Author(s): Chetehouna, K; Courty, L; Garo, JP; Viegas, DX; Fernandez-Pello, C
Source : JOURNAL OF FIRE SCIENCES Document Type : Article Volume : 32 Issue: 4 Pages: 316-327 DOI: 10.1177/0734904113514810 Published: 2014 JUL
Times Cited: 6
 
Title : Flexure of continuous HSC beams with external CFRP tendons: Effects of fibre elastic modulus and steel ratio
Author(s): Lou, TJ; Lopes, SMR; Lopes, AV
Source : COMPOSITE STRUCTURES Document Type : Article Volume : 116 Issue: Pages: 29-37 DOI: 10.1016/j.compstruct.2014.05.001 Published: 2014 SEP-OCT
Times Cited: 6
 
Title : Formation stages of bcc (Fe44Co44)Sn-12 extended solid solution by mechanical alloying
Author(s): Loureiro, JM; Costa, BFO; Malaman, B; Le Caer, G; Das, S; Amaral, VS
Source : JOURNAL OF ALLOYS AND COMPOUNDS Document Type : Article; Proceedings Paper Volume : 615 Issue: Pages: S559-S563 DOI: 10.1016/j.jallcom.2013.12.071 Published: 2014 DEC 5
Times Cited: 3
 
Title : Frictional properties of self-adaptive chromium doped tungsten-sulfur-carbon coatings at nanoscale
Author(s): Zekonyte, J; Cavaleiro, A; Polcar, T
Source : APPLIED SURFACE SCIENCE Document Type : Article Volume : 303 Issue: Pages: 381-387 DOI: 10.1016/j.apsusc.2014.03.010 Published: 2014 JUN 1
Times Cited: 3
 
Title : Growth, thermal, and spectroscopic properties of a Cr,Yb,Ho,Eu:YAP laser crystal
Author(s): Zhang, HL; Sun, DL; Luo, JQ; Chen, JK; Yang, HJ; Xiao, JZ; Zhang, QL; Yin, ST
Source : OPTICAL MATERIALS Document Type : Article Volume : 36 Issue: 8 Pages: 1361-1365 DOI: 10.1016/j.optmat.2014.03.029 Published: 2014 JUN
Times Cited: 3
 
Title : Guided Bone Regeneration using Glass-reinforced Hydroxyapatite and Collagen Membrane in the treatment of Peri-implantitis
Author(s): Kumar, GP; Sowmya, BN; Hussain, NS; Lopes, MA; Santos, JD
Source : GLASS SCIENCE AND ITS APPLICATIONS - II Document Type : Article; Book Chapter Volume : 207 Issue: Pages: 109-119 DOI: 10.4028/www.scientific.net/SSP.207.109 Published: 2014
Times Cited: 0
 
Title : High temperature behavior of nanolayered CrAlTiN coating: Thermal stability, oxidation, and tribological properties
Author(s): Polcar, T; Cavaleiro, A
Source : SURFACE & COATINGS TECHNOLOGY Document Type : Article Volume : 257 Issue: Pages: 70-77 DOI: 10.1016/j.surfcoat.2014.07.053 Published: 2014 OCT 25
Times Cited: 7
 
Title : Highly ordered luminescent calix[4]azacrown films showing an emission response selective to volatile tetrahydrofuran
Author(s): Oueslati, I; Paixao, JA; Shkurenko, A; Suwinska, K; de Melo, JSS; de Carvalho, LAEB
Source : JOURNAL OF MATERIALS CHEMISTRY C Document Type : Article Volume : 2 Issue: 42 Pages: 9012-9020 DOI: 10.1039/c4tc01596g Published: 2014 NOV 14
Times Cited: 6
 
Title : Hot micro-embossing: effect of pressure on 316L metal parts
Author(s): Sequeiros, EW; Neto, VC; Vieira, MT; Vieira, MF
Source : POWDER METALLURGY Document Type : Article Volume : 57 Issue: 4 Pages: 241-244 DOI: 10.1179/0032589914Z.000000000193 Published: 2014 SEP
Times Cited: 0
 
Title : Hygrometric Assessment of Internal Relative Humidity in Concrete: Practical Application Issues
Author(s): Granja, JL; Azenha, M; de Sousa, C; Faria, R; Barros, J
Source : JOURNAL OF ADVANCED CONCRETE TECHNOLOGY Document Type : Article Volume : 12 Issue: 8 Pages: 250-265 DOI: 10.3151/jact.12.250 Published: 2014 AUG
Times Cited: 2
 
Title : Ignition of Mediterranean Fuel Beds by Several Types of Firebrands
Author(s): Viegas, DX; Almeida, M; Raposo, J; Oliveira, R; Viegas, CX
Source : FIRE TECHNOLOGY Document Type : Article Volume : 50 Issue: 1 Pages: 61-77 DOI: 10.1007/s10694-012-0267-8 Published: 2014 JAN
Times Cited: 6
 
Title : Immobilization of bioactive factor-loaded liposomes on the surface of electrospun nanofibers targeting tissue engineering
Author(s): Monteiro, N; Martins, A; Pires, R; Faria, S; Fonseca, NA; Moreira, JN; Reisa, RL; Neves, NM
Source : BIOMATERIALS SCIENCE Document Type : Article Volume : 2 Issue: 9 Pages: 1195-1209 DOI: 10.1039/c4bm00069b Published: 2014
Times Cited: 8
 
Title : Impact strength of composites with nano-enhanced resin after fire exposure
Author(s): Reis, PNB; Ferreira, JAM; Zhang, ZY; Benameur, T; Richardson, MOW
Source : COMPOSITES PART B-ENGINEERING Document Type : Article Volume : 56 Issue: Pages: 290-295 DOI: 10.1016/j.compositesb.2013.08.048 Published: 2014 JAN
Times Cited: 8
 
Title : Improved dispersion of carbon nanotubes in aluminum nanocomposites
Author(s): Simoes, S; Viana, F; Reis, MAL; Vieira, MF
Source : COMPOSITE STRUCTURES Document Type : Article Volume : 108 Issue: Pages: 992-1000 DOI: 10.1016/j.compstruct.2013.10.043 Published: 2014 FEB
Times Cited: 11
 
Title : Improving cell adhesion: development of a biosensor for cell behaviour monitoring by surface grafting of sulfonic groups onto a thermoplastic polyurethane
Author(s): Alves, P; Pinto, S; Ferreira, P; Kaiser, JP; Bruinink, A; de Sousa, HC; Gil, MH
Source : JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE Document Type : Article Volume : 25 Issue: 8 Pages: 2017-2026 DOI: 10.1007/s10856-014-5233-1 Published: 2014 AUG
Times Cited: 4
 
Title : In Situ Characterization of NiTi/Ti6Al4V Joints During Reaction-Assisted Diffusion Bonding Using Ni/Ti Multilayers
Author(s): Cavaleiro, AJ; Ramos, AS; Fernandes, FMB; Schell, N; Vieira, MT
Source : JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Document Type : Article Volume : 23 Issue: 5 Pages: 1625-1629 DOI: 10.1007/s11665-014-0930-y Published: 2014 MAY
Times Cited: 6
 
Title : In Situ Phase Evolution of Ni/Ti Reactive Multilayers
Author(s): Cavaleiro, AJ; Ramos, AS; Martins, RMS; Baetz, C; Vieira, MT; Fernandes, FMB
Source : JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Document Type : Article Volume : 23 Issue: 7 Pages: 2446-2449 DOI: 10.1007/s11665-014-1072-y Published: 2014 JUL
Times Cited: 1
 
Title : In-situ thermal evolution of Ni/Ti multilayer thin films
Author(s): Cavaleiro, AJ; Santos, RJ; Ramos, AS; Vieira, MT
Source : INTERMETALLICS Document Type : Article Volume : 51 Issue: Pages: 11-17 DOI: 10.1016/j.intermet.2014.02.019 Published: 2014 AUG
Times Cited: 7
 
Title : Increase of the filler content in papermaking by using a silica-coated PCC filler
Author(s): Lourenco, AF; Gamelas, JAF; Ferreira, PJ
Source : NORDIC PULP & PAPER RESEARCH JOURNAL Document Type : Article Volume : 29 Issue: 2 Pages: 240-245 DOI: Published: 2014
Times Cited: 8
 
Title : Influence of albumin on the tribological behavior of Ag-Ti (C, N) thin films for orthopedic implants
Author(s): Alves, CFA; Oliveira, F; Carvalho, I; Piedade, AP; Carvalho, S
Source : MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS Document Type : Article Volume : 34 Issue: Pages: 22-28 DOI: 10.1015/j.msec.2013.09.031 Published: 2014 JAN 1
Times Cited: 17
 
Title : Influence of Superposition Length on Transverse Impact Response of Single-Strap Adhesive Joints
Author(s): Reis, PNB; Ferreira, JAM; Pereira, AM; Antunes, FJV
Source : JOURNAL OF ADHESION Document Type : Article Volume : 90 Issue: 1 Pages: 65-79 DOI: 10.1080/00218464.2013.797341 Published: 2014 JAN 2
Times Cited: 4
 
Title : Influence of the plastic anisotropy modelling in the reverse deep drawing process simulation
Author(s): Neto, DM; Oliveira, MC; Alves, JL; Menezes, LF
Source : MATERIALS & DESIGN Document Type : Article Volume : 60 Issue: Pages: 368-379 DOI: 10.1016/j.matdes.2014.04.008 Published: 2014 AUG
Times Cited: 10
 
Title : Influence of the Type of Phase Change Materials Microcapsules on the Properties of Lime-Gypsum Thermal Mortars
Author(s): Cunha, S; Aguiar, JB; Ferreira, VM; Tadeu, A
Source : ADVANCED ENGINEERING MATERIALS Document Type : Article Volume : 16 Issue: 4 Pages: 433-441 DOI: 10.1002/adem.201300278 Published: 2014 APR
Times Cited: 6
 
Title : Influence of Zr alloying on the mechanical properties, thermal stability and oxidation resistance of Cr-Al-N coatings
Author(s): Li, WZ; Chen, QZ; Polcar, T; Serra, R; Cavaleiro, A
Source : APPLIED SURFACE SCIENCE Document Type : Article Volume : 317 Issue: Pages: 269-277 DOI: 10.1016/j.apsusc.2014.08.115 Published: 2014 OCT 30
Times Cited: 6
 
Title : Insights into the thermo-mechanical properties of films cast from emulsion terpolymers
Author(s): Barata, I; Fonseca, AC; Costa, CSMF; Ferreira, L; Julio, E; Coelho, JFJ
Source : PROGRESS IN ORGANIC COATINGS Document Type : Article Volume : 77 Issue: 4 Pages: 790-797 DOI: 10.1016/j.porgcoat.2014.01.005 Published: 2014 APR
Times Cited: 2
 
Title : Interlaminar Adhesive Strength of Nano-Reinforced Glass/Epoxy Laminates
Author(s): Silva, H; Ferreira, JAM; Costa, JDM; Capela, C
Source : JOURNAL OF ADHESION Document Type : Article Volume : 90 Issue: 1 Pages: 3-15 DOI: 10.1080/00218464.2013.784867 Published: 2014 JAN 2
Times Cited: 0
 
Title : Laboratory tests on the elimination of the pinewood nematode (Bursaphelenchus xylophilus) in Pinus pinaster wood by high pressure
Author(s): Fonseca, L; Santos, MD; Queiros, RP; Abrantes, I; Saraiva, JA
Source : EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS Document Type : Article Volume : 72 Issue: 6 Pages: 825-827 DOI: 10.1007/s00107-014-0836-2 Published: 2014 NOV
Times Cited: 0
 
Title : Lanthanide tetrakis-beta-diketonate dimers for solution-processed OLEDs
Author(s): Martins, JP; Martin-Ramos, P; Coya, C; Alvarez, AL; Pereira, LC; Diaz, R; Martin-Gil, J; Silva, MR
Source : MATERIALS CHEMISTRY AND PHYSICS Document Type : Article Volume : 147 Issue: 3 Pages: 1157-1164 DOI: 10.1016/j.matchemphys.2014.06.073 Published: 2014 OCT 15
Times Cited: 5
 
Title : Lightweight screed containing cork granules: Mechanical and hygrothermal characterization
Author(s): Moreira, A; Antonio, J; Tadeu, A
Source : CEMENT & CONCRETE COMPOSITES Document Type : Article Volume : 49 Issue: Pages: 1-8 DOI: 10.1016/j.cemconcomp.2014.01.012 Published: 2014 MAY
Times Cited: 8
 
Title : Lime mortars with ceramic wastes: Characterization of components and their influence on the mechanical behaviour
Author(s): Matias, G; Faria, P; Torres, I
Source : CONSTRUCTION AND BUILDING MATERIALS Document Type : Article Volume : 73 Issue: Pages: 523-534 DOI: 10.1016/j.conbuildmat.2014.09.108 Published: 2014 DEC 30
Times Cited: 5
 
Title : Mechanical and wear behaviours of nano and microfilled polymeric composite: Effect of filler fraction and size
Author(s): Antunes, PV; Ramalho, A; Carrilho, EVP
Source : MATERIALS & DESIGN Document Type : Article Volume : 61 Issue: Pages: 50-60 DOI: 10.1016/j.matdes.2014.04.056 Published: 2014 SEP
Times Cited: 12
 
Title : Mechanical characterization of WC-10 wt% AISI 304 cemented carbides
Author(s): Fernandes, CM; Vilhena, LM; Pinho, CMS; Oliveira, FJ; Soares, E; Sacramento, J; Senos, AMR
Source : MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING Document Type : Article Volume : 618 Issue: Pages: 629-636 DOI: 10.1016/j.msea.2014.09.064 Published: 2014 NOV 17
Times Cited: 8
 
Title : Methodology for the mix design of self-compacting concrete using different mineral additions in binary blends of powders
Author(s): Nepomuceno, MCS; Pereira-de-Oliveira, LA; Lopes, SMR
Source : CONSTRUCTION AND BUILDING MATERIALS Document Type : Article Volume : 64 Issue: Pages: 82-94 DOI: 10.1016/j.conbuildmat.2014.04.021 Published: 2014 AUG 14
Times Cited: 4
 
Title : Microfabrication of high aspect ratio BST pillar arrays by epoxy gel casting from aqueous suspensions with added water soluble epoxy resin
Author(s): Olhero, SM; Kaushal, A; Antunes, P; Ferreira, JMF
Source : MATERIALS RESEARCH BULLETIN Document Type : Article Volume : 60 Issue: Pages: 830-837 DOI: 10.1016/j.materresbull.2014.09.072 Published: 2014 DEC
Times Cited: 6
 
Title : Microstructure evolution and texture development in a friction stir-processed AISI D2 tool steel
Author(s): Yasavol, N; Abdollah-zadeh, A; Vieira, MT; Jafarian, HR
Source : APPLIED SURFACE SCIENCE Document Type : Article Volume : 293 Issue: Pages: 151-159 DOI: 10.1016/j.apsusc.2013.12.122 Published: 2014 FEB 28
Times Cited: 4
 
Title : Mixed mode interlaminar fracture of carbon nanotubes enhanced epoxy/glass fiber composites
Author(s): Silva, H; Ferreira, JAM; Costa, JDM; Capela, C
Source : MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII Document Type : Proceedings Paper Volume : 592-593 Issue: Pages: 283-286 DOI: 10.4028/www.scientific.net/KEM.592-593.283 Published: 2014
Times Cited: 0
 
Title : Modulated IR radiometry for determining thermal properties and basic characteristics of titanium thin films
Author(s): Apreutesei, M; Lopes, C; Borges, J; Vaz, F; Macedo, F
Source : JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A Document Type : Article Volume : 32 Issue: 4 Pages: - DOI: 10.1116/1.4884351 Published: 2014 JUL
Times Cited: 3
 
Title : Morphology and strength of acrylonitrile butadiene styrene welds performed by robotic friction stir welding
Author(s): Mendes, N; Loureiro, A; Martins, C; Neto, P; Pires, JN
Source : MATERIALS & DESIGN Document Type : Article Volume : 64 Issue: Pages: 81-90 DOI: 10.1016/j.matdes.2014.07.047 Published: 2014 DEC
Times Cited: 11
 
Title : Nanostructured Bacterial Cellulose-Poly(4-styrene sulfonic acid) Composite Membranes with High Storage Modulus and Protonic Conductivity
Author(s): Gadim, TDO; Figueiredo, AGPR; Rosero-Navarro, NC; Vilela, C; Gamelas, JAF; Barros-Timmons, A; Neto, CP; Silvestre, AJD; Freire, CSR; Figueiredo, FML
Source : ACS APPLIED MATERIALS & INTERFACES Document Type : Article Volume : 6 Issue: 10 Pages: 7864-7875 DOI: 10.1021/am501191t Published: 2014 MAY 28
Times Cited: 14
 
Title : Nanostructuring of the conjugated polyelectrolyte poly[9,9-bis(4-sulfonylbutoxyphenyl) fluorene-2,7-diyl-2,2 '- bithiophene] in liquid crystalline C12E4 in bulk water and aligned thin films
Author(s): Knaapila, M; Fonseca, SM; Stewart, B; Torkkeli, M; Perlich, J; Pradhan, S; Scherf, U; Castro, RAE; Burrows, HD
Source : SOFT MATTER Document Type : Article Volume : 10 Issue: 17 Pages: 3103-3111 DOI: 10.1039/c4sm00092g Published: 2014
Times Cited: 3
 
Title : Notched M(T) specimen for plane strain studies
Author(s): Branco, R; Antunes, FV; Costa, JD
Source : INTERNATIONAL JOURNAL OF FATIGUE Document Type : Article Volume : 58 Issue: Pages: 28-39 DOI: 10.1016/j.ijfatigue.2013.01.011 Published: 2014 JAN
Times Cited: 4
 
Title : One-pot synthesis of biofoams from castor oil and cellulose microfibers for energy absorption impact materials
Author(s): Sousa, AF; Matos, M; Pinto, RJB; Freire, CSR; Silvestre, AJD
Source : CELLULOSE Document Type : Article Volume : 21 Issue: 3 Pages: 1723-1733 DOI: 10.1007/s10570-014-0229-z Published: 2014 JUN
Times Cited: 6
 
Title : Optimization and assessment of the Ag-Ca phase diagram
Author(s): Braga, MH; Debski, A; Gasior, W
Source : JOURNAL OF ALLOYS AND COMPOUNDS Document Type : Article Volume : 612 Issue: Pages: 280-286 DOI: 10.1016/j.jallcom.2014.05.141 Published: 2014 NOV 5
Times Cited: 3
 
Title : Precast alkali-activated concrete towards sustainable construction
Author(s): Ferreira, LFB; Costa, HSS; Barata, IIA; Julio, ENBS; Tiago, PMN; Coelho, JFJ
Source : MAGAZINE OF CONCRETE RESEARCH Document Type : Article Volume : 66 Issue: 12 Pages: 618-626 DOI: 10.1680/macr.13.00091 Published: 2014
Times Cited: 6
 
Title : Prediction of optimized composition for enhanced mechanical and electrochemical response of Zr-C-N-Ag coatings for medical devices
Author(s): Calderon, S; Oliveira, JC; Evaristo, M; Cavaleiro, A; Carvalho, S
Source : APPLIED SURFACE SCIENCE Document Type : Article Volume : 320 Issue: Pages: 570-580 DOI: 10.1016/j.apsusc.2014.08.201 Published: 2014 NOV 30
Times Cited: 4
 
Title : Processing strategies for smart electroconductive carbon nanotube-based bioceramic bone grafts
Author(s): Mata, D; Oliveira, FJ; Ferreira, NM; Araujo, RF; Fernandes, AJS; Lopes, MA; Gomes, PS; Fernandes, MH; Silva, RF
Source : NANOTECHNOLOGY Document Type : Article Volume : 25 Issue: 14 Pages: - DOI: 10.1088/0957-4484/25/14/145602 Published: 2014 APR 11
Times Cited: 4
 
Title : Protective Ag:TiO2 thin films for pressure sensors in orthopedic prosthesis: the importance of composition, structural and morphological features on the biological response of the coatings
Author(s): Lopes, C; Fonseca, P; Matama, T; Gomes, A; Louro, C; Paiva, S; Vaz, F
Source : JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE Document Type : Article Volume : 25 Issue: 9 Pages: 2069-2081 DOI: 10.1007/s10856-014-5251-z Published: 2014 SEP
Times Cited: 6
 
Title : Reactive Commercial Ni/Al Nanolayers for Joining Lightweight Alloys
Author(s): Simoes, S; Viana, F; Vieira, MF
Source : JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Document Type : Article Volume : 23 Issue: 5 Pages: 1536-1543 DOI: 10.1007/s11665-014-0923-x Published: 2014 MAY
Times Cited: 8
 
Title : Residual mechanical properties of calcareous and granite aggregate concretes after fire
Author(s): dos Santos, CC; Rodrigues, JPC
Source : MAGAZINE OF CONCRETE RESEARCH Document Type : Article Volume : 66 Issue: 16 Pages: 845-857 DOI: 10.1680/macr.14.00005 Published: 2014
Times Cited: 1
 
Title : Residual Stresses in Machining of AISI 52100 Steel under Dry and Cryogenic Conditions: A Brief Summary
Author(s): Caruso, S; Outeiro, JC; Umbrello, D; Batista, AC
Source : MATERIAL FORMING ESAFORM 2014 Document Type : Proceedings Paper Volume : 611-612 Issue: Pages: 1236-1242 DOI: 10.4028/www.scientific.net/KEM.611-612.1236 Published: 2014
Times Cited: 0
 
Title : Residual Stresses Profiles of Cladded Austenitic Stainless Steel Evaluated by X-Ray Diffraction and by Incremental Hole-Drilling Method
Author(s): Marques, MJ; Batista, AC; Coelho, L; Nobre, JP; Loureiro, A
Source : INTERNATIONAL CONFERENCE ON RESIDUAL STRESSES 9 (ICRS 9) Document Type : Proceedings Paper Volume : 768-769 Issue: Pages: 464-+ DOI: 10.4028/www.scientific.net/MSF.768-769.464 Published: 2014
Times Cited: 0
 
Title : Sliding properties of Zr-DLC coatings: The effect of tribolayer formation
Author(s): Vitu, T; Escudeiro, A; Polcar, T; Cavaleiro, A
Source : SURFACE & COATINGS TECHNOLOGY Document Type : Article Volume : 258 Issue: Pages: 734-745 DOI: 10.1016/j.surfcoat.2014.08.003 Published: 2014 NOV 15
Times Cited: 6
 
Title : Stabilization of nano-TiO2 aqueous dispersions with poly(ethylene glycol)-b-poly(4-vinyl pyridine) block copolymer and their incorporation in photocatalytic acrylic varnishes
Author(s): Monteiro, S; Dias, A; Mendes, AM; Mendes, JP; Serra, AC; Rocha, N; Coelho, JFJ; Magalhaes, FD
Source : PROGRESS IN ORGANIC COATINGS Document Type : Article Volume : 77 Issue: 11 Pages: 1741-1749 DOI: 10.1016/j.porgcoat.2014.05.030 Published: 2014 NOV
Times Cited: 3
 
Title : Stiffness of reinforced concrete slabs subjected to torsion
Author(s): Lopes, AV; Lopes, SMR; do Carmo, RNF
Source : MATERIALS AND STRUCTURES Document Type : Article Volume : 47 Issue: 1-2 Pages: 227-238 DOI: 10.1617/s11527-013-0057-x Published: 2014 JAN
Times Cited: 1
 
Title : Structural and electrochemical characterization of Zr-C-N-Ag coatings deposited by DC dual magnetron sputtering
Author(s): Velasco, SC; Lopez, V; Alves, CFA; Cavaleiro, A; Carvalho, S
Source : CORROSION SCIENCE Document Type : Article Volume : 80 Issue: Pages: 229-236 DOI: 10.1016/j.corsci.2013.11.036 Published: 2014 MAR
Times Cited: 12
 
Title : Structural, chemical, optical and mechanical properties of Au doped Al - N sputtered coatings
Author(s): Figueiredo, NM; Vaz, F; Cunha, L; Rodil, SE; Cavaleiro, A
Source : SURFACE & COATINGS TECHNOLOGY Document Type : Article; Proceedings Paper Volume : 255 Issue: Pages: 130-139 DOI: 10.1016/j.surfcoat2014.03.028 Published: 2014 SEP 25
Times Cited: 4
 
Title : Structural, mechanical and dielectric properties of Ba0.6Sr0.4TiO3-The benefits of a colloidal processing approach
Author(s): Kaushal, A; Olhero, SM; Antunes, P; Ramalho, A; Ferreira, JMF
Source : MATERIALS RESEARCH BULLETIN Document Type : Article Volume : 50 Issue: Pages: 329-336 DOI: 10.1016/j.materresbull.2013.11.028 Published: 2014 FEB
Times Cited: 8
 
Title : Structure and ionic conductivity of reactively sputtered apatite-type lanthanum silicate thin films
Author(s): Vieira, MM; Oliveira, JC; Shaula, AL; Trindade, B; Cavaleiro, A
Source : SURFACE & COATINGS TECHNOLOGY Document Type : Article Volume : 247 Issue: Pages: 14-19 DOI: 10.1016/j.surfcoat.2014.02.064 Published: 2014 MAY 25
Times Cited: 1
 
Title : Study of the effect of the silver content on the structural and mechanical behavior of Ag-ZrCN coatings for orthopedic prostheses
Author(s): Ferreri, I; Lopes, V; Calderon, SV; Tavares, CJ; Cavaleiro, A; Carvalho, S
Source : MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS Document Type : Article Volume : 42 Issue: Pages: 782-790 DOI: 10.1016/j.msec.2014.06.007 Published: 2014 SEP 1
Times Cited: 5
 
Title : Surface enhancement of cold work tool steels by friction stir processing with a pinless tool
Author(s): Costa, MI; Verdera, D; Vieira, MT; Rodrigues, DM
Source : APPLIED SURFACE SCIENCE Document Type : Article Volume : 296 Issue: Pages: 214-220 DOI: 10.1016/j.apsusc.2014.01.094 Published: 2014 MAR 30
Times Cited: 6
 
Title : Synthesis of lightweight polymer-reinforced silica aerogels with improved mechanical and thermal insulation properties for space applications
Author(s): Maleki, H; Duraes, L; Portugal, A
Source : MICROPOROUS AND MESOPOROUS MATERIALS Document Type : Article Volume : 197 Issue: Pages: 116-129 DOI: 10.1016/j.micromeso.2014.06.003 Published: 2014 OCT
Times Cited: 18
 
Title : The effect of increasing V content on the structure, mechanical properties and oxidation resistance of Ti-Si-V-N films deposited by DC reactive magnetron sputtering
Author(s): Fernandes, F; Loureiro, A; Polcar, T; Cavaleiro, A
Source : APPLIED SURFACE SCIENCE Document Type : Article Volume : 289 Issue: Pages: 114-123 DOI: 10.1016/j.apsusc.2013.10.117 Published: 2014 JAN 15
Times Cited: 13
 
Title : The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete
Author(s): Ghafari, E; Costa, H; Julio, E; Portugal, A; Duraes, L
Source : MATERIALS & DESIGN Document Type : Article Volume : 59 Issue: Pages: 1-9 DOI: 10.1016/j.matdes.2014.02.051 Published: 2014 JUL
Times Cited: 47
 
Title : Thermal performance of lightweight steel-framed construction systems
Author(s): Santos, P; Martins, C; da Silva, LS
Source : METALLURGICAL RESEARCH & TECHNOLOGY Document Type : Article Volume : 111 Issue: 6 Pages: 329-338 DOI: 10.1051/metal/2014035 Published: 2014
Times Cited: 2
 
Title : Thermal stability of nanoscale metallic multilayers
Author(s): Ramos, AS; Cavaleiro, AJ; Vieira, MT; Morgiel, J; Safran, G
Source : THIN SOLID FILMS Document Type : Article Volume : 571 Issue: Pages: 268-274 DOI: 10.1016/j.tsf.2014.05.065 Published: 2014 NOV 28
Times Cited: 4
 
Title : Ti1-xAgx electrodes deposited on polymer based sensors
Author(s): Marques, SM; Manninen, NK; Ferdov, S; Lanceros-Mendez, S; Carvalho, S
Source : APPLIED SURFACE SCIENCE Document Type : Article Volume : 317 Issue: Pages: 490-495 DOI: 10.1016/j.apsosc.2014.08.142 Published: 2014 OCT 30
Times Cited: 8
 
Title : TITANIUM SUBSTRATE SURFACES COATED WITH HYDROXYAPATITE BY MAGNETRON SPUTTERING
Author(s): Balestra, RM; Ribeiro, AA; de Oliveira, JC; Cavaleiro, A; Oliveira, MV
Source : BRAZILIAN CERAMIC CONFERENCE 57 Document Type : Proceedings Paper Volume : 798-799 Issue: Pages: 472-+ DOI: 10.4028/www.scientific.net/MSF.798-799.472 Published: 2014
Times Cited: 0
 
Title : Transient behaviour in the numerical analysis of plasticity induced crack closure
Author(s): Antunes, FV; Marques, GAS; Chegini, AG; Correia, L
Source : FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES Document Type : Article Volume : 37 Issue: 5 Pages: 526-538 DOI: 10.1111/ffe.12134 Published: 2014 MAY
Times Cited: 6
 
Title : Treatment of a Large Cystic Lesion in Anterior Maxilla using Glass reinforced Hydroxyapatite- A Case Report
Author(s): Kumar, GP; Vijayakumar, R; Sowmya, BN; Hussain, NS; Lopes, MA; Santos, JD
Source : GLASS SCIENCE AND ITS APPLICATIONS - II Document Type : Article; Book Chapter Volume : 207 Issue: Pages: 97-108 DOI: 10.4028/www.scientific.net/SSP.207.97 Published: 2014
Times Cited: 1
 
Title : Use of Hardwoods in an Integrated Biorefinery: Modelling of the Pretreatment Process and Papermaking Potential
Author(s): Duarte, GV; Moreira, RJ; Ramarao, BV; Ferreira, PT
Source : JOURNAL OF BIOBASED MATERIALS AND BIOENERGY Document Type : Article Volume : 8 Issue: 6 Pages: 594-602 DOI: 10.1166/jbmb.2014.1477 Published: 2014 DEC
Times Cited: 0
 
Title : Wear and surface residual stress evolution on twin-disc tests of rail/wheel steels
Author(s): Batista, AC; Peixoto, DFC; Nobre, JP; Coelho, L; Ramos, DM; Ferreira, LAA; de Castro, PMST
Source : INTERNATIONAL CONFERENCE ON RESIDUAL STRESSES 9 (ICRS 9) Document Type : Proceedings Paper Volume : 768-769 Issue: Pages: 707-+ DOI: 10.4028/www.scientific.net/MSF.768-769.707 Published: 2014
Times Cited: 0